Durodyne
 

 

 

 

Duct Sealers

 

Winter Weather Advisory: Due to inclement weather, some truck lines are pushing back on hauling freezable products. This may cause delays in shipping due to temperatures, regardless of where you are located (the issue is where the product ships from not where it ships to).
COLD WEATHER affects CANISTER & AEROSOL ADHESIVES the most. When adhesives get cold they get thicker. This thickening has an adverse effect on the adhesive’s sprayability characteristics. Be sure to check the appropriate product submittal for freeze cycles and be sure the product is at the appropriate storage or application temperature 24 hours prior to use.

 

DDS181 - Water Based Duct Sealer

Recommended for medium and high velocity systems. Suitable for indoor & outdoor use. Product Features: Meets Ul181A-M and UL181BM, Excellent weather & U.V. resistance.

DDS18l Submittal Form >
DDS181 SDS >

 

 

 

 

Properties
Type
Vinyl Acetate
Solids
69+_ 2%
Weight
11.6 +_.2 lbs./gal.
Color
Grey
Odor
Mild/Wet; Bland/Dry
Viscosity
140,000-180,000 CPS #7 Brookfield, 20 RPM @ 70 ºF
Flammability
Non Flammable
Effect of Freezing
No Damage-3 cycles
Storage Life
6 months @ 70ºF
Clean With
water/detergent
Method of Application:
Brush, trowel, putty knife, or caulking gun. As a general practice, it is advisable that liquid products be stirred prior to use.

 

 

DuroSeal - Water Based Duct Sealer

Recommended for medium and high velocity systems. Suitable for indoor & outdoor use. Product Features: Water based.

Duroseal Submittal Form >
Duroseal SDS >

 

 

 

 

Properties
Type
Vinyl Acetate
Solids
70%
Weight
10.5 lbs./gal.
Color
Grey
Odor
Mild
Viscosity
360,000-500,000 CPS Brookfield DV-E, Spindle TF, 5 RPM @ 70 ºF
Flammability
Non Flammable
Effect of Freezing
5 cycles
Storage Life
6 months @ 70ºF
Clean With
water/detergent
Method of Application:
Brush, trowel, putty knife, or caulking gun. As a general practice, it is advisable that liquid products be stirred prior to use.

 

 

SAS - Water Based Duct Sealer

Recommended for low and medium velocity systems. Suitable for indoor & outdoor use. Product Features: Water based, non-flammable, flexible & paintable.

SAS Submittal Form >
SAS SDS >

 

 

 

 

Properties
Type
Siliconized Acrylic
Solids
81.0+_ 1%
Weight
13.2 +_.2 lbs./gal.
Color
Grey
Odor
Mild
Viscosity
320,000-500,000 CPS T-Bar, Spindle TC-93, 20 RPM @ 77 ºF
Flammability
Non Flammable
Effect of Freezing
3 cycles
Storage Life
1 year @ 70ºF
Clean With
warm water/detergent
Method of Application:
Brush, trowel, putty knife or caulking gun. As a general practice, it is advisable that liquid products be stirred prior to use.

 

 

 

SAS-UL - Water Based Duct Sealer

SAS-UL Submittal Form>
SAS-UL SDS >

 

Recommended for low and medium velocity systems. Suitable for indoor & outdoor use. Product Features: Water based, non-flammable, flexible & paintable.

Properties
Type
Siliconized Acrylic
Solids
81.0+_ 1%
Weight
13.5 +_.2 lbs./gal.
Color
Grey
Odor
Mild
Viscosity
320,000-500,000 CPS T-Bar, Spindle TC-93, 20 RPM @ 77ºF
Flammability
Non Flammable
Effect of Freezing
Protect From Freezing
Storage Life
1 year @ 70ºF
Clean With
warm water/detergent
Method of Application:
Brush, trowel, putty knife or caulking gun. As a general practice, it is advisable that liquid products be stirred prior to use.

 

 

SGD - Solvent Based Duct Sealer

SGD Submittal Form >
SGD SDS >

 

 

Recommended for sealing joints in high pressure indoor air handling systems. Product Features: Solvent based, indoor use, oil resistant, tough, flexible, use with or without reinforcing tapes.

Properties
Type
Elastomer Rubber
Solids
70%+_ 2%
Weight
7.5 +_ .5 lbs./gal.
Color
Grey
Odor
Mild
Viscosity
250,000-300,000 CPS.#7 Brookfield, 10 RPM @ 70 ºF
Flammability
Flammable
Effect of Freezing
None
Storage Life
6 months @ 70ºF
Clean With
Mineral Spirits, Hexane, Toluene
Method of Application:
Brush, Trowel or power extrusion. As a general practice, it is advisable that liquid products be stirred prior to use.

 

DLSN - Solvent Based Duct Sealer

DLSN Submittal Form >
DLSN SDS>

 

 

Duro Dyne DLSN Sealant is a grey, single-component, non-drying, permanently flexible material designed for sealing metals, and masonry surfaces without the need or requirement of a primer.

Properties
Type
Butyl Rubber, resins, inert pigments
Solids
90% Approximate
Weight
12-13 lbs./gal.
Color
Grey
Odor
Petroleum Naptha
VOC
<.72 gms.ltr
Viscosity
130,000 to 165,000 cps Brookfield
Flammability
Flammable
Effect of Freezing
None
Storage Life

One Year (unopened drum or bucket)

Clean With
Small Spills: Mineral Spirits; Large Spills absorbents like clay

 

 

 

 

Image 2
Adhesive Catalog>
 

 
See Our Video