Insulation Adhesives
NPAC40- Portable Adhesive Canister - CLEAR
Low VOC & NO Methylene Chloride (Dichloralmethane)!
NPAC40 is a web type, high solids, general purpose adhesive which bonds well to a wide variety of substrates, with one side or two side application. It has a quick tack, is flexible, non-wrinkling and waterproof.
Gun, Hose and Gun Tip are sold seperately, please see Adhesive Applicators Page for more information.
NPAC40 Submittal Form >
NPAC40 SDS >
NPAC40 Lit Sheet >
| Properties | |
|---|---|
| Type | Synthetic Polymer |
| Application Temperature | 65° F - 95° F |
VOC |
<80 gms./ltr.
|
| Color | Clear |
| Flammability | Flammable |
| Storage Life | 15 months |
| Method of Application : | Attach spray hose and spray gun then fully open valve on canister. Hold spray gun tip 6 to 10 inches from surface to be covered, always at a 90° angle to surface. Apply even coats. Do not allow it to concentrate or puddle in one area. For best performance, use this product at room temperature. |
For Canister Disposal Instuctions please click here! >
NPAB40/NPAB187 - Portable Adhesive Canister - Black
Dual Purpose: Liner Adhesive & Edge Coating*!
NPAB40/NPAB187 is a web type, high solids, general purpose adhesive which bonds well to a wide variety of substrates, with one side or two side application. This black liner adhesive can also be used as an effective edge coating*. It has a quick tack, is flexible,
non-wrinkling and waterproof.
*Where allowed by code and inspection authorities.
Gun, Hose and Gun Tip are sold seperately, please see Adhesive Applicators Page for more information.
NPAB40/187 Submittal Form >
NPAB40/187 SDS >
NPAB40/187 Lit Sheet >
| Properties | |
|---|---|
| Type | Synthetic Polymer |
| Application Temperature | 65° F - 95° F |
VOC |
<80 gms./ltr.
|
| Color | Black |
| Flammability | Flammable |
| Storage Life | 15 months |
| Method of Application : | Attach spray hose and spray gun then fully open valve on canister. Hold spray gun tip 6 to 10 inches from surface to be covered, always at a 90° angle to surface. Apply even coats. Do not allow it to concentrate or puddle in one area. For best performance, use this product at room temperature. |
For Canister Disposal Instuctions please click here! >
SRPGLVOC - Sprayable Solvent Based Insulation Adhesive
Sprayable adhesive for bonding insulation material to sheet metal. Product Features: Low VOC, Immediate tack and excellent coverage
SRPGLVOC Submittal Form >
SRPGLVOC SDS >
MAS Certified Green Certificate of Compliance >
SGDLVOC - Solvent Based Duct Sealers
Recommended for sealing joints in high pressure indoor air handling systems. Product Features: Low VOC, solvent based, indoor use, use with or without reinforcing tapes.
SGDLVOC Submittal Form >
SGDCLVOC SDS >
SGD1LVOC, SGD5LVOC SDS >
MAS Certified Green Certificate of Compliance >
DTWAC - Web Adhesive
Click here for a Testimonial Video.
This 4 1/2” wide web spray adhesive provides a versatile and strong bonding formula which is excellent for use on fiberglass, rubber and cotton liners. Non-chlorinated and non-ozone depleting.
DTWAC Submittal Form >
DTWAC SDS >
DTWAC Lit Sheet >
| Properties | |
|---|---|
| Base | Synthetic resin(s) and copolymer mixture |
| Solids | 25+_ 0.2% |
Solvent System |
Aliphatic (Hexane) and Ketone (Acetone)
|
| Color | White |
| Odor | Strong mint-like/wet, none/dry |
| Flammability | Extremely Flammable when wet |
| Storage Life | 6 months @ 70ºF |
| Clean With | Mineral spirits |
| Bonding Time : | 10 seconds to 2 minutes |
CCDTWAC - Carb Compliant Web Adhesive
Duro Dyne CCDTWAC is a high performance aerosol, offering rapid setting and quick dry time. It is formulated to dry clear within 15 minutes. This adhesive is ideal for use on duct liner, duct wrap or on sheet metal.
CCDTWAC Submittal Form >
CCDTWAC Lit Sheet >
| Properties | |
|---|---|
| Solids | 24% |
Solvent System |
hexane, acetone, methyl acetate, oxsol
|
| Color | White |
| Odor | Strong solvent |
| Bonding Time : | 1 minute - 1 hour |
DTWACC+ - Carb Compliant Web Adhesive
Duro Dyne DTWACC+ is a CARB compliant, high performance aerosol, offering rapid setting and quick dry time. This adhesive is ideal for use on duct liner, duct wrap or on sheet metal.
DTWACC+ Submittal Form >
DTWACC+ Lit Sheet >
Dyn-O-Coat - Edge Coating
Dyn-O-Coat combines the flexibility of sealants with the quick drying advantage of aerosol to bring you a highly efficient Edge Coating. Simply spray on to encapsulate rips, tears and cut edges. It is ideal for use on internally
lined ductwork and rigid fiberglass ductwork.
Dyn-O-Coat Submittal Form >
Dyn-O-Coat SDS >
Dyn-O-Coat Lit Sheet >
| Properties | |
|---|---|
| Type | Synthetic rubber |
| Solids | 25+_ 0.2% |
Solvent System |
Aliphatic (Hexane) and Ketone (Acetone)
|
| Color | Black |
| Odor | mint-like/wet, none/dry |
| Flammability | Extremely Flammable when wet |
| Storage Life | 6 months @ 70ºF |
| Clean With | Mineral spirits |
| Bonding Time : | dry to touch in 10-15 minutes depending on himidity, temperature, substrates and application thickness. Fully cures in 1 hour. |
WITM - Water Based Insulation Adhesive
Adhesive for bonding insulation material to sheet metal. Product Features: Water based, good wet tack, non-flammable when wet.
WITM Submittal Form >
WITM SDS >
MAS Certified Green Certificate of Compliance >
| Properties | |
|---|---|
| Type | Resin Emulsion |
Weight |
9.2 lbs./gal.
|
| Color | White |
| Odor | Bland |
| Viscosity | #4 at 6RPM RVT., 5500 to 6500 CPS |
| Flammability | Non Flammable |
| Effect of Freezing | Protect from Freezing |
| Storage Life | 6 months @ 70ºF |
| Clean With | warm water/detergent |
| Method of Application: | Designed for use with spray equipment or Duro Dyne Roto Bonder. As a general practice, it is advisable that liquid products be stirred prior to use. |
WITLV-AS / BWITLV-AS - Airless Sprayable Duct Liner Adhesive
WITLV-AS is a premium, multi-use, water based, non-flammable, UL Classified duct liner and insulation adhesive specifically engineered and formulated for all types of spray, roller, brush or extrusion applications. Airless Sprayable Duct Liner Adhesive also available in black as BWITLV-AS.
WITLV-AS / BWITLV-AS Submittal Form >
WITLV-AS / BWITLV-AS Lit Sheet >
BWITLV-AS SDS >
WITLV-AS SDS >
MAS Certified Green Certificate of Compliance >
| Properties | |
|---|---|
| Type | Synthetic latex |
| Solids | Approx 40% |
Weight |
9.5 lbs./gallon
|
| Color | White |
| Odor | Mild |
| VOC | 2.4 g/l |
| Flammability | Non Flammable |
| Effect of Freezing | No Damage-5 cycles |
| Storage Life | One year (unopened) |
| Clean With | Warm Water/Soap when wet; solvent when dry |
| Method of Application: | Brush, roller, standard spray or roller coated |
WIT-HS Water Based Duct Liner Adhesive
WIT-HS is a premium, multi-use, water based, non-flammable, UL Classified duct liner and insulation adhesive specifically engineered and formulated for all types of spray, roller, brush or extrusion applications. High viscosity liquid for systems preferring a slightly heavier coating and greater wet tack.
WIT-HS Submittal Form >
WIT-HS Lit Sheet >
WIT-HS SDS >
MAS Certified Green Certificate of Compliance >
| Properties | |
|---|---|
| Type | Synthetic latex |
| Solids | 43% +/- 2% |
Weight |
9.5 lbs./gallon
|
| Color | White |
| Odor | Mild |
| VOC | >5 g/l |
| Flammability | Non Flammable |
| Effect of Freezing | Do Not Allow To Freeze |
| Storage Life | One year (unopened) |
| Clean With | Warm Water/Soap when wet; solvent when dry |
| Method of Application: | Brush, roller, standard spray, airless spray or roller coated |
CCASA-WFTC - Carb Compliant Solvent Based Insulation Adhesive
Duro Dyne CCASA-WFTC is a high performance aerosol adhesive offering rapid setting and quick dry time. CCASA-WFT is formulated to dry clear within 15 minutes. This adhesive is ideal for use on duct liner, duct wrap or on sheet metal, and is also suitable to bond a variety of substrates. It is suitable in high temperatures environments, as well as where a clear, flexible, non-wrinkling or water resistant bond is desired.
CCASA-WFTC Submittal Form >
CCASA-WFTC Lit Sheet >
| Properties | |
|---|---|
| Solids | 23% |
Weight |
12oz
|
| Color | White |
| Odor | Strong solvent |
| Method of Application: | Aerosal Spray |
