Go To Duro Dyne Home Page

Back To
Tools and Fastener Menu

DURO DYNE PIN RIVETS

Pin Rivets are strong, hollow rivets assembled onto a solid mandrel, manufactured to strict quality control standards, and available in a wide range of sizes and styles to provide the proper rivet for every type of application. Pin Rivets are inserted and set from the same side. They are particularly practical where there is no access to the reverse side of the work.

To determine what the letters and numbers correspond to,  please review the following chart:

Part 1 Part 2 Part 3 Part 4 Part 5 & 6
         
Rivet Material Pin Material Rivet Diam.
(in 32nds of an inch)
MaximumGrip
(in 16ths of an inch)
Rivet
Head Style
S=Steel S=Steel 3 = 3/32" 1 = 1/16" D=Dome
A=Aluminum A=Aluminum 4 = 1/8" 2 = 1/8" C=Countersunk
C=Copper C=Copper 5 = 5/32" 3 = 3/16" T=Thousand Pack
(coated steel) 6 = 3/16" 4 = 1/4"
X=Stainless Steel X=Stainless Steel 8 = 1/4" 5 = 5/16"
6 = 3/8"
8 = 1/2"
10 = 5/8"

Please click on one of the following rivet codes to go to rivet listing.

SS AS AA XS XX CS
Steel Rivet
Steel Mandrel
Aluminum Rivet
Steel Mandrel
Aluminum Rivet
Aluminum Mandrel
Stainless Rivet
Steel Mandrel
Stainless Rivet
Stainless Mandrel
Copper Rivet
Steel Mandrel

Back to Top