Go To Duro Dyne Home Page

Back to
Machinery Menu

DURO DYNE PINSPOTTERS

LF-1000LN / LF-2000LN Hand Held Pinspotter

LF-1000LN / LF-2000LN Pinspotter
 

Spec Sheet LF1000LN/LF2000LN
See Parts Listing
for LF-1000LN/2000LN

 

The LF-1000LN and LF-2000LN Pinspotters are portable units that weld 14 Gauge PN style pins on up to 22 Gauge steel. Insert PN Pin into the TP-2 magnetic tip and depress trigger. A timed burst of electricity fuses the pin to the steel. Can also weld LN style pins with the use of TPL-2 Tip purchased separately. Available in 110V & 220V, 50 to 60hz; fuse for 15 amps.

Item # Code Description Approx. Weight
27003 LF-1000LN Hand held Pinspotter 110V 10 lbs
27004 LF-2000LN Hand Held Pinspotter 220V 10 lbs

"NEW" MF-12A Compact Pinspotter

MF12A Compact Pinspotter

See Parts Listing for MF-12A 
See Owners Manual MF-12A
 

Duro Dyne's MF has been the standard for entry level "through insulation" welders for over 30 years.  Proven performance and high reliability have made the MF a "Must Have" for any sheet metal shop which does occasional insulating.  Duro Dyne now introduces the MF-12A, building on that history, and creating a new pinspotter with greater power and versatility.  Special design welding transformers allow the MF-12A to deliver more power, precisely timed to the welding tip.  The new MF-12A will weld pins from 1/2 inch to 2 inches long on steel from 26 to 20 gauge.  Proven solid-state weld control circuitry guarantees years of reliable, trouble-free service in your shop.

Item # Code Description Approx. Weight
27110 MF-12A Variable Capacity Compact Portable Pinspotter 85 lbs

"NEW" CDMF110 Compact Pinspotter

CDMF110 Pinspotter

Spec Sheet for CDMF110 
See Owners Manual CDMF110
 

Duro Dyne introduced the CDMF110, a new compact pinspotter with greater power and versatility that is powered by a single 110 volt power source! Special design welding capacitors allow the CDMF110 to deliver more power, precisely timed to the welding tip. The new CDMF110 will weld pins from 1/2 inch to 2 inches long on steel from 26 to 20 gauge. It is designed for use with both internal duct liner as well as external foil faced duct wrap. Proven solid-state weld control circuitry guarantees years of reliable, trouble-free service in your shop.
Item # Code Description Approx. Weight
27119 CDMF110 Compact Portable Pinspotter 85 lbs

"NEW" PBF-510 Pinspotter

PBF-510 Pinspotter


Spec Sheet for PBF-510
Parts Listing for PBF-510
Owner's Manual for PBF-510

 

Duro Dyne is proud to introduce the next generation of portable insulation fastening equipment.  Built upon the highly successful PBF pinspotter concept, the PBF-510 delivers more power, further away and with more control than ever before.  A new Multi-tap transformer allows the PBF-510 to deliver precise, timed low voltage to the welding tip.  This voltage will weld pins from 1/2 inch to 2 inches long on steel from 26 to 18 gauge.  Proven solid-state weld control circuitry guarantees years of reliable, trouble-free service in your shop.

Item # Code Description Approx. Weight
27372 PBF-510 Pinspotter 220V 275 lbs

"NEW" FG MACH III Pinspotter

New FG MACH III (replaces the FG MACH 1, MACH II & MACH IIA)

Spec Sheet for FG MACH III
 

The FG Mach III Pinspotter was designed utilizing the best of current technologies to provide greater power and reliability for insulation fastening. The inherent minimal material handling and the use of welded pins will insure your shop a cost efficient, quality product. Our upgraded FG Mach III machine is capable of welding pins up to 4 to address the higher R-value insulation now being specified throughout the industry. Will weld the full range of Duro Dyne pins on galvanizes metal up to 18 gauge.
Item # Code Description Approx. Weight
18004 FG MACH III Wide Mouth, High Capacity, Bulk Feed Automatic Pinspotter 800 lbs

RH MACH IIA Pinspotter

RH MACH IIA Rolling Head Pinspotter. Replaces RH MACH II

Spec Sheet for RH MACH IIA
Owner's Manual for RH MACH IIA
 

RH MACH IIA welds BDEP, CTC, SSP, CP & FTC type fasteners to duct work up to 18 gauge. It requires 220v, 50 to 60hz service, fused for 60 amps. A source of 85 psi air is required. Position a fastener over the insulation and depress the trigger switch. The machine inserts the fastener through the insulation and welds it to the steel. The ability to move the trolley instead of the duct work minimizes material handling. Precision polished and hardened tracks combined with ground bearings, assure trouble- free movement of the trolley assembly.

 

 

Item # Code Description Approx. Weight
18011 RH MACH IIA Rolling Head Pinspotter 900 lbs

Back to Top