Go To Duro Dyne Home Page

Back to
Insulation Fastener Menu

BG STANDARD BANGER AND
TBG TRIPOD BANGER

The Standard and Tripod Bangers are easy to install. Place the liner over the sheet metal and drive the banger through the insulation. Upon impact, the jaws (two on standard banger and three on Tripod for added stability) of the fastener penetrate the metal and lock securely within the thickness of the metal itself. (Always place a hardened steel block behind the sheet metal at the point of impact). Bangers can be installed with the model DHH Double Header Hammer.

BG Standard Banger  BG Standard Banger Pin: .136" Diameter
Washer: Diameter - 1.0"
Thickness - .015"

Thousand Packs  

Approximate Pin Length

   
Item # Code Before Setting After Setting Use

Quantity per Box

26033 BGT-12 .475 .375 1/2" Insulation 1M
26044 BGT-100 .625 .525 1" 1-2# density 1M
Bulk Packs  

Approximate Pin Length

   
Item # Code Before Setting After Setting Use

Quantity per Box

26095 BGB-12 .475 .375 1/2" Insulation 5M
26096 BGB-100 .625 .525 1" 1-2# density 5M

TBG Tripod BangerTBG Tripod Banger Pin: .136" Diameter
Washer: Diameter - 1.0"
Thickness - .015"

Thousand Packs  

Approximate Pin Length

   
Item # Code Before Setting After Setting Use

Quantity per Box

26129 TBG-12 .475 .375 1/2" Insulation 1M
26130 TBG-100 .625 .525 1" 1-2# density 1M
Bulk Packs  

Approximate Pin Length

   
Item # Code Before Setting After Setting Use

Quantity per Box

26133 TBGB-12 .475 .375 1/2" Insulation 5M
26134 TBGB-100 .625 .525 1" 1-2# density 5M

Back to Top