Go To Duro Dyne Home Page

Back To Dyna-Tite Menu

Dyna-Tite Logo

CL23 CABLE LOCK

The Maximum Load Range for each size wire rope incorporates a design safety factor of 5:1.  The CL23 and wire rope combination should be sized for the job so that the projected load falls within the appropriate working load limit (WLL).

Wire Rope for use with the CL23 is supplied in rolls.  The 1/8 inch comes in 500 foot rolls.  The 3/16 inch wire rope is supplied in 250 foot rolls.

See CL23 Cable Lock and Wire Rope Specifications

CL23 Cable Lock

Item No. Code Description Use Wire Rope Diameter
for CL-23 Cable Lock
Safe Working Load
at 5:1 Safety Factor
Box Quantity
30350 CL23 Cable Lock     100 per box
30204 WC-4 Wire Rope 1/8" 25-250 lbs 500 foot roll
30206 WC-6 Wire Rope 3/16" 50-640 lbs 250 foot roll
 

CL18 CABLE LOCK

The Dyna-Tite CL18 Cable Lock is for use with 3/32 inch and 1/8 inch wire rope.  These size wire ropes are available in 500 foot rolls.  Depending upon the wire rope utilized, the CL18 has a working load limit of up to 225 lbs.  As with all Dyna-Tite cable locks, the CL18 features and easy release pin for simple adjustments without the use of tools.

See CL18 Cable Lock and Wire Rope Specifications

 

CL18 Cable Lock

Item No. Code Description Use Wire Rope Diameter
for CL-18 Cable Lock
Safe Working Load
at 5:1 Safety Factor
Box Quantity
30354 CL18 Cable Lock     100 per box
30202 WC-3 Wire Rope 3/32" 25-150 lbs 500 foot roll
30204 WC-4 Wire Rope 1/8" 25-225 lbs 500 foot roll
 

CL12 CABLE LOCK

The CL12 is designed for use with 3/32 inch wire rope.  The wire rope is available in 500 foot roll.  As with all Dyna-Tite cable locks, the CL12 includes release pins for easy adjustment.  The CL12 is the perfect product for hanging smaller diameter spiral (less than 24 inches), typical residential and light commercial ductwork, and air handlers in attics.

See CL12 Cable Lock and Wire Rope Specifications

 

CL12 Cable Lock

Item No. Code Description Use Wire Rope Diameter
for CL-12 Cable Lock
Safe Working Load
at 5:1 Safety Factor
Box Quantity
30351 CL12 Cable Lock     100 per box
30202 WC-3 Wire Rope 3/32" 25-150 lbs 500 foot roll
30230 LC15-332 Loop Cable Sling 3/32" x 15 feet   100 per box
30232 LC25-332 Loop Cable Sling 3/32" x 25 feet     50 per box
 

KV12 BRACKET ASSEMBLY

The KV12 Bracket assembly enhances the Dyna-Tite suspension system by the addition of an integral bracket, which fastens the cable lock to the duct with sheet metal screws.  Once the KV assembly bracket is attached to the duct, the wire rope "drop" is passed into the entry hole at the top of the bracket, through the cable lock, and out the exit hole at the bottom.  The locking teeth inside the cable lock engage the wire rope and secure the ductwork in place.  The KV12 Bracket assembly and the CL12 have a working load limit of up to 150 lbs, depending upon the wire rope utilized.
 

KV12 Bracket Assembly c/w CL12 Cable Lock

Item No. Code Description

Box Quantity

30361 KV12 Bracket Assembly with CL-12
For use with WC3 3/32" Wire Rope

100 per box


Back to Top