Its time saving qualities have been shown to reduce installation by up to 6 times compared to traditional threaded rod.
It provides a fast and strong solution to the task of hanging Mechanical and HVAC Systems.
It allows the installer to position the hangers vertically or at an angle to the suspended object.
Dyna-Tite System is lightweight and easy to carry, and combines these qualities with the inherent strength of high tensile wire rope.
Its light weight improves safety on the job. Carrying the product on the job site is easy and, in aerial situations reduces accident risk caused by falling materials.
TO ENSURE HANGING SYSTEM INTEGRITY AND SAFETY Use only Duro Dyne wire rope.
TO FACILITATE HEIGHT ADJUSTMENT Install the object low and adjust it upwards to the desired level.
DO NOT EXCEED THE WORKING LOAD LIMIT (WLL) OF THE PRODUCT Each product is load rated and incorporates a minimum safety factor of 5:1. This WLL takes into account the specification criteria of the Dyna-Tite Cable Lock and the wire rope.
DO NOT USE ON COATED WIRE ROPE it is important to maintain the metal to metal contact between the locking wedges in the Dyna-Tite and the wire rope.
DO NOT APPLY PAINT OR OTHER COATING to any part of the assembly as these may impair the free movement of the locking wedges inside the Dyna-Tite Cable Lock.
DO NOT APPLY LUBRICANT to any part of the assembly as this will alter the surface nature of the wire rope and attract dirt and debris.
DO NOT USE FOR LIFTING (UNDER HOOK SLINGS). This product is designed for static load applications only.
KEEP THE PRODUCT CLEAN AND FREE FROM DIRT Any dirt should be removed from the product prior to assembly.
INSPECT PERIODICALLY Upon inspection, discard and replace if worn, distorted or damaged.
REMOVE DAMAGED WIRE ENDS using a designated pair of wire rope cutters prior to inserting into the Dyna-Tite Cable Lock.