Go To Duro Dyne Home Page

Go To Connector
Ordering Information

FLEXIBLE DUCT CONNECTOR

* Adobe Acrobat Reader required to open these files.

FLEXIBLE DUCT CONNECTOR PRODUCT

Neoprene
Specification
Durolon
Specification
Canflex
Specification
Thermafab
Specification
Insulflex
Specification
Selection Guide Flexible Connector
Ordering Information
Duro Stapler & Staples Connector 
Dispenser 
*Fabric
Chemical
Resistance

HOW TO SELECT THE PROPER TYPE OF FLEXIBLE DUCT
CONNECTOR FOR YOUR INSTALLATION

Duct ImageTo meet every type of installation requirement, whether it be for factory, institution, office or home, Duro Dyne offers the widest variety of flexible duct connector fabrics and sizes __ pre-assembled with the sheet metal permanently secured to the fabric by means of exclusive seam locks.
The type and sizes of the air handling system being installed will determine the proper type of flexible connector to be used (see below).
A study of the installation requirements such as high pressure system; outdoor installation; proximity to chemical fumes; temperature range, etc. will determine the fabric to be selected.




FOR COMMERCIAL & INDUSTRIAL APPLICATIONS

Super Metal Fab Flexible Connector

Metal Fab Flexible Connector

SUPER METAL-FAB METAL FAB
Gauge of Steel: 24 ga. (0.66mm)
Dimensions:
76mm metal - 152mm fabric - 76mm metal
(3" metal - 6" fabric - 3" metal)
Gauge of Steel: 24 ga. (0.66mm)
Dimensions:
76mm metal - 76mm fabric - 76mm metal
(3" metal - 3" fabric - 3" metal)



FOR LIGHT  COMMERCIAL & RESIDENTIAL APPLICATIONS

Econ-O-Fab Flexible Connector

Junior Flexible Connector

ECONO-O-FAB JUNIOR
Gauge of Steel: 28 ga. (0.46mm)
Dimensions:
76mm metal - 76mm fabric - 76mm metal
(3" metal - 3" fabric - 3" metal)
Gauge of Steel: 28 ga. (0.46mm)
Dimensions:
45mm metal - 76mm fabric - 45mm metal
(1-3/4" metal - 3" fabric - 1-3/4" metal)

DURO DYNE FLEXIBLE CONNECTORS FEATURE
PATENTED-FABRIC-TO-METAL SEAMS

"grip-loc"Grip Loc

The double-lock gripping fingers of metal-to-fabrics add tremendously to holding power compared with conventional methods. Connector lays flat for easy marking and fabrication. GRIP LOC is available on Metal-Fab, Super Metal-Fab & Econ-O-Fab.




Back To Top