Durodyne
 

 

 

Rebuilt Machinery

Pinspotters

Used Machinery is on a First Come, First Serve basis

 

 

FG (4ft) Pinspotter

Image 2
Serial#: 80694

Warranty for: 1 year

Electrical requirements: 220 vac single phase, fused for 60 amps

Rebuilt to new condition with new style 7kva transformer, new style vibrator base/bowl, new style photo eye vibrator sensor and new style feed delay circuit.

Weld capacity: 1/2 - 2 inch pins from 26-16 gauge metal

Orignal Owner's Manual>

 

 

 

 

RH Mach IIA Pinspotter

Image 2
Serial#: 80888

Warranty for: 1 year

Electrical requirements: 220 vac single phase, fused for 60 amps

Rebuilt to new condition with new style 7kva transformer, new style vibrator base/bowl, new style photo eye vibrator sensor.

Weld capacity: 1/2 - 2 inch pins from 26-16 gauge metal

Orignal Owner's Manual>

 

 

 

 

FG (4ft) Pinspotter

Image 2
Serial#: 80889

Warranty for: 1 year

Electrical requirements: 220 vac single phase, fused for 30 amps

Rebuilt to new condition with new style vibrator base/bowl and new style photo eye vibrator sensor.

Weld capacity: 1/2 - 1-1/2 inch pins from 26-20 gauge metal

Orignal Owner's Manual>

 

 

 

 

FG (4ft) Pinspotter

Image 2
Serial#: 80892 

Warranty for: 1 year

Electrical requirements: 220 vac single phase, fused for 30 amps

Rebuilt to new condition with new style vibrator base/bowl and new style photo eye vibrator sensor.

Weld capacity: 1/2 - 1-1/2 inch pins from 26-20 gauge metal

Orignal Owner's Manual>

 

 

 

 

LF 1000

Image 2
Serial#: 20036

Warranty for: 90 days

Good condition.
Electrical Requirement: 120 VAC IN, outlet as close to the main fuse box as possible; fuse 15 Amps
The magnetic welding tip of the LF1000 must be cleaned in order for the nails to hold on to the sheet metal properly. Be sure to utilize a wire brush to clean the magnetic tip.

Literature Sheet >
Orignal Owner's Manual>

 

 

 

 

 

 

 

LF 2000

Image 2
Serial#: 26785

Part#: 27004-RM-0816
Warranty for: 90 days

Good condition.
Electrical Requirement: 220 VAC IN, outlet as close to the main fuse box as possible; fuse 15 Amps
The magnetic welding tip of the LF2000 must be cleaned in order for the nails to hold on to the sheet metal properly. Be sure to utilize a wire brush to clean the magnetic tip.

Machines offered do not accommodate over a 2” nail. Call with questions for more detail.

Literature Sheet >
Orignal Owner's Manual>

 

 

 

 

LF 2000

Image 2
Serial#: n/a

Part#: 27004-RM-0816
Warranty for: 90 days

Good condition.
Electrical Requirement: 220 VAC IN, outlet as close to the main fuse box as possible; fuse 15 Amps
The magnetic welding tip of the LF2000 must be cleaned in order for the nails to hold on to the sheet metal properly. Be sure to utilize a wire brush to clean the magnetic tip.

Machines offered do not accommodate over a 2” nail. Call with questions for more detail.

Literature Sheet >
Orignal Owner's Manual>

 

 

 

Image 2
Spare Parts List >

Image 2
Remanufactured Machines Warranty >

 

Image 2

Image 2

Image 2

Image 2

Image 2

Image 2

Image 2

Image 2

Image 2

Image 2

 

 

 
See Our Video